Product Overview

Replaces aerosol dusters with simple, safe 100% high velocity CO2 gas.
- Non-flammable, non-toxic. No CFCs or HCFCs.
- Non-corrosive.
- Safe on plastics.
- Leaves no residue or spotting.
- Ideal for use on Camera lenses, keyboards, workbenches etc.
- Uses standard 3/8 - 24UNF Threaded cartridges 12gm, 16gm, 25g and 38gm.

Protective eyewear MUST be worn when using. Dispenses freezing CO2 - if used too close to equipment or sprayed onto skin can cause damage. Cartridge itself can freeze when in use - use enclosed protective foam cartridge cover.

Directions for use:
1. Tighten nut on nozzle.
2. Place black foam cover over cartridge.
3. Insert cartridge into valve. Turn clockwise and firmly hand-tighten the cartridge into the Power Cleaner. DO NOT remove cartridge until empty - check by depressing trigger before removing.
4. Use trigger level to control CO2 flow. Note - contains freezing CO2 gas under pressure, so depress trigger gently!
5. DO NOT dispense upside down.

Replacing the cartridge:
1. First depress trigger to check empty.
2. Unscrew cartridge (counter-clockwise).
3. Follow instructions above to install new cartridge.

IMPORTANT SAFETY DATA
Cartridges are under great pressure. Please use in accordance with manufacturers instructions. Non-aerosol. Recyclable steel. Volume 20 cm3. Contains 16g Carbon Dioxide UN1013 (E290) under pressure. Gross cartridge weight - 58g. Colour - Gold. Do not pierce except with approved device. Never dispose of full cartridges. Keep out of reach of children. Explosion danger - 50C max temperature.